Feature:

1. Working Voltage: DC7.5-24V

2. Output channel: Can be used 3/2/1 channel

3. Output current: 4A*3

4. Connecting method: Common anode

5. Dimension: L105.5*W45*H23mm

6. Remote distance: 50 meters indoor, 100 meters outdoor

7. Software: Android system (at least version 2.3 with WIFI function) or IOS system, 

Language : English/Chinese. 

8. Receiver sensitivity: 802.11b DSSS(-5dBm),802.11b CCK (-10dBm),

802.11g OFDM(-15dBm)

9. Connect way: V+ R, G, B for LED Light, V+, V- for Power supply, ANT for WIFI signal reception.

10. Reset button(inside the controller): Short press: change from gradual change to strobe flash for single color Version. 

Or change in 27 modes for RGB Version.

Long press: (more than 20s): Restore to factory settings. WiFi SSID for connection is “LEDnetXXXXXXXXXX”, 

password: “88888888”. IP: 192.168.10.1

Magic Color 1.0 Instruction

1. Install LED Magic Color 1.0

First make sure your computer has been installed iTune, if not Please download the latest version of iTunes, after complete 

the installation, search " LED Magic Color ", or search in App store by iPhone, download for free and install it. There are preview 

pages before you power the WiFi Controller.

2. Connect WIFI controller

3. Setting the wifi controller

After scan the device. Search that you can change the name and password when you enter the below page:

1) Change the item name as "LED WIFI Controller"

2) Change the WIFI SSID name and setting the connect mode for device.

4. Software operating (RGB and single color)

RGB Vision

How to use

1) Color ring: Press the color ring, choose any color as your request. The color state shows your choice.

2) Brightness bar: On the left, it is the Max brightness, on the right is the Min. brightness.

3) Run key: Invalid in static color, valid for dynamic modes.

4) Open: ON/OFF.

5) 20 built-in modes:

6) How to edit mode

Single Color Vision